EzyJamb® is the only door jamb system that eliminates trim, giving you that subtle, contemporary, clean line look. It’s durable, it’s affordable and is at home in commercial offices and showrooms, quality homes and public spaces like hospitals and schools.
EzyJamb is split type trim-free door jamb system which is fully adjustable to any wall thickness.
EzyJamb is screw fixed to the jamb studs and header with flat headed screws every 8" (through the perforated sides), into the wall stud, becoming a solid part of the wall structure.
EzyJamb is fitted after the drywall has been installed, and has 1-1/2" perforated sides for flush finishing with top coat into the walls, achieving clean trim-free lines around the doorway.
EZ Concept products are manufactured from zinc annealed steel and meet the finished surfaces standards to ensure it can be painted immediately, without any special preparation, so long as it is free of dust, dirt and oil.
Yes, molding or trim can be fitted, but the EzyJamb concept is designed to create an ‘trim-free’ opening.
Any type of baseboard can be used but to compliment the flush finish look — “Alubase” slim line aluminium baseboard, which is only 0.06inches in thickness is the best matching option.
EzyJamb can be used with a variety of concealed and non-mortised hinges. Stainless Stainless steel EzyJamb hinges are provided with each door frame (lift off hinges are available if required).
Yes, EzyJamb can be used with a solid core door. You will need to make sure that you are using the correct hinge and quantity to accommodate the door weight.
Plaster around the edges of the EzyJamb will not crack if the EzyJamb is installed according to the installation guide — i.e. must be screwed off every 8" and double screwed at the hinge points and top corners. EzyJamb then becomes an integral part of the wall.
Yes, custom made EzyJambs are available with no header for full height doors.
10 -15 minutes depending on the installer.
Yes, masonry wall installation instructions are available contact firstname.lastname@example.org for more detail.
Check out our extensive EZ Concept finishing range.
A range of Cavkit trims are available to transform your existing cavity slider unit into an trim-free door way. We can also supply complete flush finish Cavkits. Contact us to find out more about our SlideSet flush finish cavity sliding system.
Yes, a large range of EzyReveal angles are available so that your whole project will blend in with the trim-free look.
Yes, EzyJamb has been tested in the US by Intertek and is fire rated up to 90 minutes (for the US region).
The manufacturer strongly recommends a timber stud or a 0.29 material thickness metal stud on both sides of the opening.
EzyJamb frames are not welded and are clipped together using a unique EzyJamb system that ensures an easy install and smooth finish.
EZ Concept products are manufactured from highest quality cold-formed steel sections.
Responsibility of and caring for the environment in which we live is a Studco hallmark that is promoted at every level of our business. Our commitment to the environment and ISO14001 accreditation means less waste and no chemical treatment is required on our products.
View Studco's Environmental Policy for more information.